Clean-running, fast-setting adhesives that keep lines moving and products sealed.
RUN FASTER, CLEANER, AND MORE RELIABLY WITH HOT MELT ADHESIVES THAT ARE BUILT FOR MACHINE UPTIME.
Clean-running, fast-setting adhesives that keep lines moving and products sealed.
Every batch runs the same—no adjustments, no surprises, no rework.
Next day lead times keep your plant stocked and on schedule.
Clogged nozzles, charred tanks, and products that pop open cost you time and money.
Capital helps you run cleaner, faster, and more reliably with hot melt adhesives that bond securely and machine right. No surprises. No rework. No breakdowns.
You get consistent batches that run the same every time, short lead times, and support from field chemists who answer the phone and fix problems fast.
Whether you are sealing cartons, direct mail, or bonding plastic, we help you pick the right adhesive, get it running, and keep it that way.
Not sure which adhesive fits your line? Talk to an expert today.
Capital’s hot melt adhesives are built for one thing: performance on your line. Every formula is engineered to bond fast, run clean, and hold strong under pressure.
Set speed is matched to your application. Whether you need a fast grab or long open time, we dial in timing to fit your process.
No stringing, no tailing, no angel hair. Operators spend less time scraping nozzles and more time keeping production on track.
Resists charring, gelling, and odor across long shifts and tank holds, so your adhesive runs as clean at hour eight as it does at hour one.
Delivers strong, permanent bonds across a wide range of coated, porous, and slick substrates, even under pressure, heat, or cold chain conditions.
Every batch meets tight specs for viscosity, softening point, open time, and color. No surprises, no tweaks, no mid-run rework. Just consistent output.
Fewer char issues, cleaner tanks, and less downtime mean fewer maintenance stops, less scrap, and better output without cutting corners on adhesive performance.
Capital’s hot melt adhesives come in multiple form factors to match your tank size, equipment setup, and plant preferences. Each one is designed to run clean and melt fast.
Available in 35-pound boxes, bulk drums, or gaylords up to 1,200 pounds.
Ideal for high-volume tank systems. Melts quickly, flows evenly, and minimizes bridging or clumping in bulk loaders.
Encapsulated to prevent blocking, commonly used for pressure-sensitive adhesives (PSAs). Fits both large and small tanks based on preference or equipment limits.
Flows smoothly through automated feeders. Great for small-batch runs or frequent adhesive changes with fast melt and low residue.
For manual or low-volume applications. Melts clean in glue guns for quick repairs or off-line assembly work.
Our hot melt adhesives are designed to bond reliably across a wide range of materials used in packaging and product assembly. If it runs on your line, we’ve likely bonded it.
Works on Solid Bleached Sulfate (SBS), Coated Unbleached Kraft (CUK), Coated Natural Kraft (CNK), Solid Unbleached Sulfate (SUS), Coated Recycled Board (CRB), Clay Coated News Back (CCNB), Uncoated Recycled Board (URB), and Thermal Mechanical Pulp (TMP). Bonds fast with clean bead placement and no pop opens under pressure or cold storage.
Grabs on aqueous or polyethylene-coated board without smearing or lift. Cartons stay flat, close cleanly, and pass print inspection without adhesive failures.
Forms strong, fast-setting bonds on recycled and virgin liners without stringing, tailing, or nozzle buildup on case and carton lines.
Maintains tack and peel strength on polypropylene (PP), polyester (PET), polyethylene (PE), polystyrene (PS), and cellulosic film (acetate). Resists lift and cold chain failure.
Bonds polyethylene terephthalate (PET), high-density polyethylene (HDPE), and open or closed cell foam in various densities. No primers required. Low-temp flow speeds assembly.
Capital’s hot melt adhesives are trusted across packaging and converting lines where speed, clean application, and bond strength matter most. Each product is tailored to your process.
The everyday workhorse for case and carton sealing. Fast setting, cost-effective, and proven across a wide range of paperboard and packaging applications.
Cleaner running and more thermally stable than EVA. Ideal for high-speed lines, long pot life, and operations looking to reduce char and downtime.
Stays tacky at room temperature. Used for resealable packaging, labels, and tapes where peel strength and clean removal are critical.
Bonds temporarily, then peels clean. Perfect for tipping, inserting, promotional pieces, and pharma cartons where a removable bond is needed.
Tough, heat-resistant adhesives for demanding applications like filters, electronics, and automotive. Bonds well to metals and plastics where thermal or chemical resistance is critical.
Flexible, low-odor adhesives with long open time and excellent adhesion to plastics, films, and foils. Ideal for product assembly, hygiene, or labeling lines.
If your application falls outside the usual range, we develop adhesives matched to your substrates, temperature limits, or line conditions, down to the batch level.
Whether you're forming trays or carefully assembling parts, you'll get adhesives engineered to bond at your production pace—fast or slow.
Every batch meets spec, runs the same, and stays clean through the line, so your operators don’t need to tweak settings or troubleshoot mid shift.
When something breaks, we’re there. You get fast answers and real support from people who know your machines and resolve issues quickly.
We don’t guess. We match adhesives to your substrates, machines, and conditions to get a product that runs right the first time, every time.
Products ship on time, every time. No delays. No scrambling. Just predictable orders that keep your production on schedule.
With formulas designed to run clean on your machines, you skip trial-and-error, avoid jams, and get bonds that hold, no matter what.
Choosing the right hot melt adhesive comes with questions. Below are the ones we hear most from plant managers, operators, purchasers, and engineers who need adhesives that perform without fail.
It depends on your substrates, line speed, bond strength, and end use requirements. We’ll review your specs, test samples, and recommend a product for you that just works.
Yes. We analyze your current product’s performance and specifications, then match or improve it with a Capital formula that often runs cleaner and holds better.
Hot melts ship in 35-pound boxes, bulk drums, or gaylords that hold up to 1,200 pounds. We’ll match the format to your volume and equipment.
Our hot melt products ship next day. We keep lead times short so you can avoid overstocking or production delays.
You get hands on support from field chemists who understand your process. We help optimize setup, troubleshoot issues, and improve performance at the machine when needed.
Yes. We offer hot melts designed for films, foils, and coated board. We test on your actual materials to make sure it bonds right the first time.
Every batch is verified for viscosity, open time, and softening point. You get predictable results without mid run surprises or rework.
Speak with a field-tested adhesive expert who understands your line, listens to your goals, and helps identify what will actually work for your process.
You’ll receive samples optimized for your line speed, substrates, and setup. Whether it’s a trusted formula or a tailored one, it’s made to work.
You get a consistent product, fast answers, and less downtime. If anything goes wrong, we show up, troubleshoot fast, and keep your line moving.
Case Studies
